login: password:
Registration

Plate

Flat rolled product of some minimum thickness and width arbitrarily dependent on the type of metal. Thickness of plates typically ranges from 6 to 300 mm (from 0.25 to 12 inches), width from 200 to 2000 mm (8 to 80 inches).
Rolled from heavy slabs supplied by a slabbing mill or continuous caster or sometimes rolled directly from an ingot, plates vary greatly in dimensions. The largest mills can roll plates 200 millimetres thick, 5 metres wide, and 35 metres long. These three dimensions are determined by the slab or ingot weight as well as the rolling-mill size. Sometimes only a few plates of the same dimensions and quality specifications are ordered.

Date ASIA EUROPE USA
01/12/2009 560-585 560-570 500-625
31/07/2009 579 475 630
31/05/2009 400-700 997.5 600-800
31/03/2009 750-780 750-780 750-780
31/01/2009 806 673 806
23/12/2008 888-999 888-999 888-999
30/10/2008 800-820 900-920 1010-1020
30/09/2008 750-820 940 970-980
30/08/2008 880-910 750-760 1040-1060
30/07/2008 955 1268 1307
30/06/2008 936 1230 1225
30/05/2008 860 1147 1160
30/04/2008 864 1110 1065
30/03/2008 820 1034 978
28/02/2008 730 980 887
30/01/2008 668 962 847
30/12/2007 670 955 837
1




All rights reserved
www.primemetals.com